In this report we’re going to examine how to create your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and techniques which you can use.

If you have a dog that likes to bark, and especially if your dog loves to play in the backyard and other areas of the house, you will need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up which will look a little scary at first, but it’s really very simple. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape from the cardboard, so you will need to cut around the edge of the mask so you get something that resembles a cone. The main thing here is to be realistic with what type of paper plate which you’re using.

Then you will have to wrap the cardboard around the edges of the paper plate, making sure there is a good seal between the two pieces so that you can ensure that nothing will leak once you place the mask on. Be sure that the edges are cut so the edges are not sharp, as this can damage the edges of the mask.

Glue it http://www.archumeshkekre.com/best-affordable-dog-food-finding-perfect-type-inexpensive-dog-food/ on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask first, so that you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.

Don’t worry too much about the paint getting stuck into your mask. It’s easy to remove it later, and it’ll leave you with a wonderful finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint once you’re done, so that you don’t end up with smudges or smears on your dog.

Then it’s time to glue the mask onto your dog’s head. First you need to make sure that you have a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you may start to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask and then fold it over. Be sure that it’s quite strong and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you have the mask snugged firmly onto the face of your dog. Do not make the folds too big or else it might look messy. Once you’ve done this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask on the dog. Make certain that the ears are flat and be sure that it is not too short or long as this can cause some issues with the mask slipping off the dog’s face.

If you are using a dog mask as your dog protection, you will have to do some sanding to make certain it’s secure on your dog. You can accomplish this by sanding off any excess paper that may have been removed from your mask.